UK CBAM from 2027: what exporters to the UK need to know

The UK CBAM is a tax on the carbon embodied in imported aluminium, cement, fertilisers, hydrogen, iron and steel, starting on 1 January 2027. The UK importer pays it to HMRC, on direct emissions only, using either HMRC's default value for each commodity code or verified actual data from the producing plant. For exporters, actual data is now worth something in two markets: the EU and the UK.
What the UK CBAM is
The UK Carbon Border Adjustment Mechanism was set up by the Finance Act 2026 and is administered by HMRC. It puts a carbon price on certain imported goods comparable to the price UK producers face under the UK Emissions Trading Scheme. Unlike the EU CBAM, there are no certificates and no registry: it is a tax, self-assessed by the importer on a return.
Five sectors are covered from 1 January 2027: aluminium, cement, fertilisers, hydrogen, and iron and steel. Goods are identified by 8-digit commodity code, and the list closely follows the EU CBAM. Electricity, which the EU covers, is not included. Glass and ceramics were considered and left out.
Who pays, and when
The liable person is the importer. An importer must register with HMRC once the value of its CBAM goods passes £50,000 over 12 months; HMRC applies a backward-looking 12-month test and a 30-day forward-looking test. Registration opens on 1 January 2028, and for the first year it is due by 31 January 2028.
| Period | Return and payment due |
|---|---|
| 1 January to 31 December 2027 (one annual period) | 31 May 2028 |
| January to March 2028 | 31 July 2028 |
| April to June 2028 | 29 September 2028 |
| July to September 2028 | 30 November 2028 |
| October to December 2028 | 28 February 2029 |
The exporter does not file anything with HMRC. But goods shipped from 1 January 2027 fall into the importer's first return, so UK buyers will start asking their suppliers for verified data during 2027.
How the charge is worked out
For each type of good, the importer multiplies the embodied emissions by the sector's CBAM rate and subtracts any carbon price relief for carbon prices already paid abroad. The relief cannot exceed the charge.
The rate is set each quarter from the average UK ETS auction price, reduced by the share of emissions UK producers in that sector still receive as free allowances. On 16 October 2026 HMRC published illustrative rates, based on the July to September 2026 average auction price of £58.15. They create no tax liability; the rates for January to March 2027 are due before the end of 2026.
| Sector | Illustrative rate (£ per tCO₂e) |
|---|---|
| Iron and steel | 9.69 |
| Aluminium | 9.79 |
| Cement | 8.78 |
| Fertilisers | 1.45 |
| Hydrogen | 9.24 |
The rates are low today because most UK production still receives free allowances. They will rise as free allocation is phased out, so the gap between default values and actual data matters more each year.
Direct emissions only
At launch the UK CBAM counts direct emissions: fuels and processes within the installation's boundaries, plus the direct emissions embodied in relevant precursors such as crude steel, pig iron, clinker, unwrought aluminium or ammonia. Emissions from electricity consumed are not included; the government has said indirect emissions will not be added before 2029. Precursors produced in the UK are exempt.
This is the main difference from the EU CBAM for steel and aluminium exporters. A figure prepared for an EU buyer can be reused only after taking out electricity, putting it on a calendar year and replacing any EU default values used for precursors.
Default values or actual data
HMRC published its default values on 16 October 2026: one value per 8-digit commodity code, in tonnes of CO₂e per tonne of product, the same whatever the country of origin, for 2027 and 2028. There are 570 codes: 478 for iron and steel, 58 for aluminium, 27 for fertilisers, 6 for cement and 1 for hydrogen.
The alternative is actual data from the producing installation, which must meet four conditions:
- One calendar year. The monitoring period runs from 1 January to 31 December. For goods imported before 2028, the importer may use the year of import, the year before, or the year the goods were made.
- Verified. By a verifier accredited to ISO 14065:2020 and ISO/IEC 17029:2019, through an accreditation body that is a full member of the Global Accreditation Cooperation, normally with a site visit and a 5% materiality threshold.
- Five decimal places. The intensity is total direct emissions, including precursors, divided by the tonnes of the good produced in the period. Cement is measured per tonne of clinker contained and fertilisers per tonne of nitrogen, then converted to the good.
- Sent to the importer. The operator sends the full verification report, or a good-specific verification summary.
Two rules shape the choice. A return filed on default values cannot be amended later to use actual data. And actual data for a precursor cannot be combined with the default value for the final good, although default values can be used for precursors when the final good uses actual data.
What it means for an exporter: a worked example
Take high-tensile steel bolts, commodity code 7318 15 88. HMRC's default value is 6.077 tCO₂e per tonne. At the illustrative iron and steel rate of £9.69, that is a charge of about £58.89 per tonne for the UK importer.
A bolt maker with a verified direct intensity of 2.4 tCO₂e per tonne (an illustrative figure) would cost its buyer about £23.26 per tonne: roughly 60% less. On 1,000 tonnes a year the difference is about £35,600, and it grows as the rates rise. For hot-rolled coil (7208 39 00, default 3.468) the default charge is about £33.60 per tonne.
For many exporters in India, Turkey, Vietnam or China, the same verified plant data now serves two schemes. The EU needs it per quarter in the Commission's communication template, with indirect emissions where they count. The UK needs it per calendar year, direct only, compared with HMRC's default value. EKO CBAM produces both from one annual emissions report: the EU template and a UK CBAM statement, with any EU default precursor replaced by its UK default value and anything a UK importer cannot use flagged before you send it.
Frequently asked questions
When does the UK CBAM start?
On 1 January 2027, for imports of aluminium, cement, fertilisers, hydrogen, iron and steel. The first return and payment, covering all of 2027, are due by 31 May 2028.
Does the UK CBAM include electricity emissions?
No. It covers direct emissions only, including those of relevant precursors. The government has said indirect emissions will not be included before 2029, and electricity itself is not a UK CBAM good.
Can an EU CBAM verification be used for the UK CBAM?
Not automatically. The UK methods are designed to work alongside the EU's, but the UK needs a calendar-year monitoring period, direct emissions only and a verifier accredited to the standards HMRC lists.
Who pays the UK CBAM, the exporter or the importer?
The UK importer pays HMRC. The exporter's role is to provide verified actual data; without it, the importer must use HMRC's default value, which is usually higher.


