NEWCBAM definitive period is live — get declaration-ready with EKO CBAM →
Clean fuels

Lowering ethanol carbon intensity for 45Z: the 2026 GREET update and USDA's farm calculator

Illustration: Lowering ethanol carbon intensity for 45Z: the 2026 GREET update and USDA's farm calculator

An ethanol plant lowers its carbon intensity for the 45Z credit in two places: inside the plant, mainly through the energy it uses and the carbon it captures, and on the farm, where USDA's new feedstock calculator now lets corn grown with qualifying practices count. In 2026 both routes changed: the 45ZCF-GREET model was updated in June and September, and USDA finalised its rules for low-carbon feedstocks in June.

Why carbon intensity is worth chasing

Under Section 45Z, the credit per gallon is the base amount multiplied by an emissions factor of (50 − emissions rate) ÷ 50, rounded to the nearest 0.1. Each 5 kg CO₂e per MMBtu of reduction moves the factor by one step, which at the $1.00 base rate is worth $0.10 per gallon. For a plant producing 100 million gallons a year, one step is $10 million. Our guide to the 45Z clean fuel production credit in 2026 explains the calculation in full.

Because the factor moves in steps, the question for each plant is not "how low can we go?" but "which projects carry us across the next step, at what cost?"

What changed in the 45ZCF-GREET model in 2026

45ZCF-GREET is the Department of Energy's version of the GREET lifecycle model used to set 45Z emissions rates. Two updates matter for ethanol producers.

June 2026

  • Indirect land use change removed for fuel produced after 31 December 2025, as required by the One Big Beautiful Bill Act. This lowers the rate of every crop-based pathway.
  • Separate results for 2025 and post-2025 fuel, so producers can apply the right rules to each year.
  • Behind-the-meter power split into integrated and non-integrated sources.
  • Feedstock origin: feedstock from outside the United States, Mexico and Canada is ineligible for post-2025 fuel.

September 2026

Released alongside Notice 2026-53, which set the 2026 emissions rate table, the September model:

  • incorporates USDA's Feedstock Carbon Intensity Calculator (FD-CIC) for feedstocks grown with qualifying regenerative practices;
  • adds inputs for plants that run integrated natural gas combined heat and power (CHP);
  • renames distillers corn oil as distillers corn oil and distillers sorghum oil (DCO/DSO);
  • adds renewable natural gas pathways from food scraps, corn stover, grain stillage and mixed organic wastes.

Levers inside the plant

For a corn dry mill, process energy is usually the largest emissions source the producer controls directly. The main levers are:

  • Heat. Replacing purchased natural gas with renewable natural gas or a biomass boiler, or generating heat and power together in an integrated CHP system, which the September model now handles explicitly.
  • Electricity. Behind-the-meter renewable power, now modelled separately as integrated or non-integrated supply.
  • Efficiency. Lower energy use per gallon through heat recovery, drying and distillation improvements, and higher yields per bushel.
  • Carbon capture. Capturing and storing fermentation CO₂ gives a large reduction. But a facility cannot claim 45Z and the 45Q carbon capture credit in the same year, so the value of capture must be compared under both credits before committing.

Each lever needs evidence: metered gas and electricity, contracts for renewable supply, and monthly records that tie back to the inputs typed into the model. Keeping plant energy in the same approved dataset as the company's GHG inventory avoids two versions of the same numbers.

Levers on the farm: USDA's feedstock calculator

USDA published its final Technical Guidelines for the Production of Regenerative Agricultural Biofuel Feedstocks on 25 June 2026, updating interim guidance from 17 January 2025. The Feedstock Carbon Intensity Calculator gives a crop-specific carbon intensity per bushel, calculated field by field. It does not include land use change.

Crops and practices

Four crops are covered: corn, soybeans, sorghum and spring canola. A reduced-carbon-intensity crop must be produced with nutrient management, alone or combined with one or more of no-till, reduced till or cover crops. Nutrient management is assessed on nitrogen use efficiency, using actual nitrogen rates and actual and expected yields; nitrification inhibitors and manure are recognised. Practices such as buffers, grassed waterways and prairie strips are not counted.

What farms must keep and sign

  • A nutrient management budget documented before nutrients are applied.
  • Records of practices, nitrogen and yields, and all sales of the crop, kept for five years.
  • A Biofuel Feedstock Report for each reduced-intensity crop sold, certified under penalty of perjury, with attestations that the carbon benefit is not sold into more than one market, that no-till is continued on the rotation for at least four years in five, and that the land was not converted after 17 January 2025.

Each year a sample of farms supplying each first point of aggregation is audited by an ISO 14065-accredited verifier that includes an agricultural expert.

From the field to the plant

Low-carbon attributes move through the supply chain on a mass balance basis: the grain does not have to be physically separated, but every intermediary and the fuel producer must keep in-and-out records, the feedstock reports and proof of verification. Farmers cannot claim 45Z themselves; any value reaches them through the price the plant or elevator pays. For the plant, that makes growers part of its supplier engagement programme: who to enrol, what data to collect and what premium per bushel the extra credit can support.

For fuel produced in 2025, Notice 2026-53 allows producers to use the 2026 version of the calculator if the USDA guidelines are met, with the advance nutrient budget treated as satisfied for 2025 and 2026, although nutrient inputs must still be substantiated.

Putting it together: a plan per plant

  1. Run each plant on the September 2026 model and note the emissions rate and the distance to the next 0.1 step.
  2. Split the rate by stage (feedstock, process heat, electricity, transport) to see where the reductions can come from.
  3. Cost the plant projects and a grower programme side by side, and rank them by the factor steps each unlocks and by net present value.
  4. Set up the evidence trail before the reductions are claimed: meter data, renewable contracts, feedstock reports and chain-of-custody records.
  5. Re-check when Treasury publishes the final 45Z regulations and each time DOE updates the model.

Frequently asked questions

Does indirect land use change still count in 45Z?

No. For fuel produced after 31 December 2025, emissions from indirect land use change are excluded from the emissions rate.

Which crops can use USDA's feedstock calculator?

Corn, soybeans, sorghum and spring canola, grown with nutrient management alone or combined with no-till, reduced till or cover crops.

Can farmers claim the 45Z credit?

No. The credit belongs to the fuel producer. Farmers benefit only if the buyer pays a premium for verified low-carbon grain.

Do low-carbon bushels have to be kept separate?

No. USDA uses mass balance accounting, so attributes follow the quantity sold without physical segregation, supported by records at each step.

This article is general information, not tax advice.

Find the projects and grower programmes that move each plant to the next 45Z step with EKO CLEANFUEL.EKO CLEANFUEL →
Newsletter

EKOTRACE & EKOFIN updates, plus one practical guide a month

Regulation changes, product releases and how-tos. No spam — unsubscribe any time.

Start your net-zero journey.

A walkthrough built around your own use case — carbon, CBAM, ESG, suppliers or financed emissions.

Request demo Talk to our experts